组成多频道⽆线监听系统 

1.⽤BNC线将发射机的天线输出端与天线组合器RF IN1⾄RF IN4 中的⼀个BNC接⼝连接;

2.⽤BNC线将天线组合器的RF OUT输出端和有源天线或⽆源天线 BNC接头连接; 

3.正确连接的发射机的⾼频信号相加,并通过连接的发送天线发送出去。

组成多频道⽆线⻨克⻛天线阵列系统

1.⽤BNC线将有源天线或者⽆源天线的BNC接头与天线组合器的 RF IN1⾄RF
IN4中的⼀个BNC接⼝连接; 

2.⽤BNC线将天线组合器的RF OUT输出端和天线放⼤分配器主机的ANT IN输⼊端连接; 

3.正确连接有源天线或者⽆源天线的⾼频信号相加,通过连接的天线放⼤分配器主机分配到⽆线⻨克⻛上。

Forming a multi-channel wireless monitoring system

1. Connect the antenna output terminal of the transmitter to one of the BNC terminals in the antenna combiner RF IN1 and RF IN4 using a BNC cable;

2. Connect the RF OUT output of the antenna combiner to the BNC connector of the active antenna or source antenna using a BNC cable;

3. The high-frequency signals of the correctly connected transmitters are added together and sent out through the connected transmitting antenna.

Compose a multi-channel linear antenna array system

1. Connect the BNC connector of the active antenna or source antenna to one of the BNC connectors in RF IN1 and RF IN4 of the antenna combiner using a BNC cable;

2. Connect the RF OUT output of the antenna combiner to the ANT IN output of the antenna amplifier distributor host using BNC cable;

3. Correctly connect the power frequency signals of the active antenna or the power source antenna, and distribute them to the power line through the connected antenna amplifier distributor host.

19:39:29